Brakes | Brake Levers | Brake Pads

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Smooth post cantilever pads - 70mm pad length

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Contains 1 Pair of BR-CT91 Pads.

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

FEATURES - Cartridge included - For severe condition COMPATIBLE MODEL BR-M970, BR-M960, BR-M951, BR-M950, BR-M770, BR-M760, BR-M750, BR-M739, BR-M600, BR-M580, BR-M570, BR-M530, BR-M510, BR-M432, BR-M431, BR-M430, BR-M422, BR-M421, BR-M420, BR-M330, BR-R550, BR-T670, BR-T660, BR-T610, BR-T4010, BR-T4000, BR-T300, BR-MX70, BR-MC18

*** Please Note*** - This is a Bulk Sku, and doesn't have packaging Updated with a new resin compound, the B03S lasts up to 40% longer than the previous generation (B01S). Compared to metal pads, the resin compound is quiet, generates less heat, and offers more progressive stopping power (no sudden braking). The only compromise? Resin has a shorter lifespan than metal, especially under wet conditions. Compatible with Shimano BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M416A, BR-M415, BR-M4050, BR-M3050, BR-M395, BR-M375, BR-M365, BR-M355, BR-M315, BR-T675, BR-T615, BR-TX805, and BR-MT500 disc brake calipers. Also compatible with TRP Spyre, Tektro Dorado HD-715, Orion, Gemini, Auriga, Volans, Auriga, Aquila, Aries and Mira brakes.

Shimano 2 Piston resin Pad Compatible with Shimano B-type Calipers Replaces B01S and B03S

Tektro disc brake rotors are crafted with corrosion resistant stainless steel. - Lightweight rotor design - High heat dispersion and heat tolerance - Includes (6) mounting bolts and T25 torque tool

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle. SOLD as a 10- Pack

All MAGURA brakes use low viscosity mineral oil (Royal Blood) as hydraulic medium. Contrary to DOT brake liquid it does not irritate human skin nor damage the paint off your frame. Biggest asset: It does not absorb water and actually lubricates the whole system. Regular bleeding caused of old brake liquid is therefore not necessary! Please pay attention to the safety instructions on the packaging working with Royal Blood. For all MAGURA disc and rim brakes.

Io Mechanical Disc Brake Pads

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Brake adapter for A-Standard to Post Mounts for Frames ( Rear Brake)

Brake adapter for A-Standard Post Mounts for Forks.

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Steel - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

For Forks with a 160mm Direct Mount to a 203mm Rotor.

These disc brake pads fit a variety of Hayes brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate - Compatible with Hayes Dominion A2 brakes

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Genuine replacement parts Get back on the bike with fresh brake pads for optimal operation and safety. Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes. - Replacement disc brake pads for Zoom HL-280 calipers - HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models

Bicycle Brake Pads Standard Compound The Standard Bicycle compound by Galfer USA is a moderate-use pad with a similar feel to an OEM brake pad. This pad has a strong durability in most riding conditions. Best Use - This pad was designed for recreational to moderate use. We generally recommend this pad for road bike use, and moderate trail riding use. Pad is a replacement option for Shimano B01S / B03S

The Standard Bicycle compound by Galfer USA is a moderate-use pad with a similar feel to an OEM brake pad. This pad has a strong durability in most riding conditions. Compatible with AVID Trail 7 All Years Trail 9 All Years Trail X0 All Years SRAM G2 All Years Guide Ultimate All Years Guide-R All Years Guide-RS All Years Guide-RSC All Years Guide-T All Years

Shimano Sora BL-R3000 Road Brake Levers - Design to seamlessly function with SL-R3000 - Brake lever is compatible with a wide variety of brake calipers - Not compatible with linear-pull brakes - Brake Lever Actuation: Short Pull

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

BR-MT200 Disc Brake Caliper - Post-mount caliper

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Aluminum - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

- High performance compounds recommended for all conditions - Steel backing

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Lever blade kits sold each - Includes cam guide

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

The Road G1455 is a new brake pad compound specifically developed to offer the best performance on road and under all weather conditions. Thanks to the knowledge and experience achieved in more than 60 years of manufacturing braking systems for two-wheel vehicles, Galfer has developed some new powerful, efficient and hard-wearing brake pads for road bikes. SRAM Force All Years Guide Ultimate All Years HRD All Years Level TLM All Years Level Ultimate All Years RED 22 All Years Rival All Years X0 Trail All Years

Bicycle Brake Pads ROAD Compound - The Road G1455 is a new brake pad compound specifically developed to offer the best performance on road and under all weather conditions. Thanks to the knowledge and experience achieved in more than 60 years of manufacturing braking systems for two-wheel vehicles, Galfer has developed some new powerful, efficient, and hard-wearing brake pads for road bikes. Compatible with K02S, K03S, K04S, L02A, L03A, L04C SHIMANO 105 BR-R7070 All Years BR-RS305 All Years BR-RS405 All Years BR-RS505 All Years BR-RS805 All Years Dura ACE All Years GRX BR-RX400 All Years GRX BR-RX810 All Years Metrea BR-U5000 All Years Tiagra BR-4770 All Years Ultegra BR-R8070 All Years Ultegra Disc Road All Years XTR BR-M9100 (2 Piston) All Years TRP HYLEX - FLAT MOUNT All Years TEKTRO HD-R310 All Years HD-R510 All Years

- High performance compounds recommended for all-conditions - Steel backing

- Aluminum pad holder with R55C4 pads

• High performance compounds recommended for all-conditions • Steel backing

MODEL NO WP-Y8B598040 SERIES SHIMANO DEORE LX M550 Series Material Resin M02 Resin Pad

These adapter brackets are designed to work with the Post Mount style brake mounts.

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

- Shimano, SM-RT56 Rotor, 180mm or 160mm, ISO, for resin pads only - Stainless steel rotor

Compatible with these Shimano Brake models BR-M8110 BR-M7110 BR-R8070-F BR-R7070 BR-4770 BR-RX810 BR-RX400

6-Bolt Disc Brake Rotor, SM-RT56