Sport & Performance

The ABLE is a high-performance off-road machine that tilts more towards the “mountain skinny” side of the gravel segment. It prefers a big tire but keeps a short rear end - in fact, it’s the same as the ALLROAD at 420mm. This is achieved by the most striking feature on the bike - the elevated drive-side chainstay. Getting a chainstay this short with high tire volume is a packaging exercise because the chainring, chainstay, and tire all compete for space behind the bottom bracket. On mountain bikes this problem is addressed by widening the bottom bracket -- but that affects Q factor in a negative way. When we made the decision to make the ABLE 1X-specific it opened the design envelope and ultimately led to the decision to elevate the chainstay. By moving it up and out of the way we could make it extremely wide resulting in an incredibly responsive ride. While our award-winning ALLROAD is a Swiss Army knife for a majority of mixed surface riding, when the path gets rambunctious its road-racing genes might seem lacking. We found ourselves on occasion wanting a bike that was equally engineered, but felt more at home on steeper, rockier and more rugged terrain. It was from this desire that the ABLE was born. It’s lightweight, tight, durable and agile. You can point it in any direction and go. The ABLE begs to be ripped around on singletrack, fire roads, hardpack dirt, and chunky gravel. Proven on the brutal roads of the 2019 Dirty Kanza where ALLIED athletes piloted their ABLEs to overall victory. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ABLE is a high-performance off-road machine that tilts more towards the “mountain skinny” side of the gravel segment. It prefers a big tire but keeps a short rear end - in fact, it’s the same as the ALLROAD at 420mm. This is achieved by the most striking feature on the bike - the elevated drive-side chainstay. Getting a chainstay this short with high tire volume is a packaging exercise because the chainring, chainstay, and tire all compete for space behind the bottom bracket. On mountain bikes this problem is addressed by widening the bottom bracket -- but that affects Q factor in a negative way. When we made the decision to make the ABLE 1X-specific it opened the design envelope and ultimately led to the decision to elevate the chainstay. By moving it up and out of the way we could make it extremely wide resulting in an incredibly responsive ride. While our award-winning ALLROAD is a Swiss Army knife for a majority of mixed surface riding, when the path gets rambunctious its road-racing genes might seem lacking. We found ourselves on occasion wanting a bike that was equally engineered, but felt more at home on steeper, rockier and more rugged terrain. It was from this desire that the ABLE was born. It’s lightweight, tight, durable and agile. You can point it in any direction and go. The ABLE begs to be ripped around on singletrack, fire roads, hardpack dirt, and chunky gravel. Proven on the brutal roads of the 2019 Dirty Kanza where ALLIED athletes piloted their ABLEs to overall victory. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The ABLE is a high-performance off-road machine that tilts more towards the “mountain skinny” side of the gravel segment. It prefers a big tire but keeps a short rear end - in fact, it’s the same as the ALLROAD at 420mm. This is achieved by the most striking feature on the bike - the elevated drive-side chainstay. Getting a chainstay this short with high tire volume is a packaging exercise because the chainring, chainstay, and tire all compete for space behind the bottom bracket. On mountain bikes this problem is addressed by widening the bottom bracket -- but that affects Q factor in a negative way. When we made the decision to make the ABLE 1X-specific it opened the design envelope and ultimately led to the decision to elevate the chainstay. By moving it up and out of the way we could make it extremely wide resulting in an incredibly responsive ride. While our award-winning ALLROAD is a Swiss Army knife for a majority of mixed surface riding, when the path gets rambunctious its road-racing genes might seem lacking. We found ourselves on occasion wanting a bike that was equally engineered, but felt more at home on steeper, rockier and more rugged terrain. It was from this desire that the ABLE was born. It’s lightweight, tight, durable and agile. You can point it in any direction and go. The ABLE begs to be ripped around on singletrack, fire roads, hardpack dirt, and chunky gravel. Proven on the brutal roads of the 2019 Dirty Kanza where ALLIED athletes piloted their ABLEs to overall victory. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ABLE is a high-performance off-road machine that tilts more towards the “mountain skinny” side of the gravel segment. It prefers a big tire but keeps a short rear end - in fact, it’s the same as the ALLROAD at 420mm. This is achieved by the most striking feature on the bike - the elevated drive-side chainstay. Getting a chainstay this short with high tire volume is a packaging exercise because the chainring, chainstay, and tire all compete for space behind the bottom bracket. On mountain bikes this problem is addressed by widening the bottom bracket -- but that affects Q factor in a negative way. When we made the decision to make the ABLE 1X-specific it opened the design envelope and ultimately led to the decision to elevate the chainstay. By moving it up and out of the way we could make it extremely wide resulting in an incredibly responsive ride. While our award-winning ALLROAD is a Swiss Army knife for a majority of mixed surface riding, when the path gets rambunctious its road-racing genes might seem lacking. We found ourselves on occasion wanting a bike that was equally engineered, but felt more at home on steeper, rockier and more rugged terrain. It was from this desire that the ABLE was born. It’s lightweight, tight, durable and agile. You can point it in any direction and go. The ABLE begs to be ripped around on singletrack, fire roads, hardpack dirt, and chunky gravel. Proven on the brutal roads of the 2019 Dirty Kanza where ALLIED athletes piloted their ABLEs to overall victory. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The ABLE is a high-performance off-road machine that tilts more towards the “mountain skinny” side of the gravel segment. It prefers a big tire but keeps a short rear end - in fact, it’s the same as the ALLROAD at 420mm. This is achieved by the most striking feature on the bike - the elevated drive-side chainstay. Getting a chainstay this short with high tire volume is a packaging exercise because the chainring, chainstay, and tire all compete for space behind the bottom bracket. On mountain bikes this problem is addressed by widening the bottom bracket -- but that affects Q factor in a negative way. When we made the decision to make the ABLE 1X-specific it opened the design envelope and ultimately led to the decision to elevate the chainstay. By moving it up and out of the way we could make it extremely wide resulting in an incredibly responsive ride. While our award-winning ALLROAD is a Swiss Army knife for a majority of mixed surface riding, when the path gets rambunctious its road-racing genes might seem lacking. We found ourselves on occasion wanting a bike that was equally engineered, but felt more at home on steeper, rockier and more rugged terrain. It was from this desire that the ABLE was born. It’s lightweight, tight, durable and agile. You can point it in any direction and go. The ABLE begs to be ripped around on singletrack, fire roads, hardpack dirt, and chunky gravel. Proven on the brutal roads of the 2019 Dirty Kanza where ALLIED athletes piloted their ABLEs to overall victory. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. Additionally, each ECHO frameset comes standard with a Chris King Dropset for zero compromises in headset durability and performance. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. Additionally, each ECHO frameset comes standard with a Chris King Dropset for zero compromises in headset durability and performance. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The ECHO isn’t an everyday racing beast. It’s actually two everyday racing beasts, each with a distinct personality. We offer the ECHO frameset as a fuselage to allow you to build the frame however you please. Our ECHO frameset is paired with our ECHO Stem that is painted to match the frame color, and the feather light Black Inc Carbon Handlebar and Post. Additionally, each ECHO frameset comes standard with a Chris King Dropset for zero compromises in headset durability and performance. It's the ultimate starting point for your ECHO build. The ECHO frameset comes standard with internal hydraulic routing and is compatible with SRAM and Shimano electronic drivetrains. At the heart of the ECHO’s genetic code is pure unadulterated speed - the ability to transform from a road race thoroughbred to a versatile, agile gravel bike with a simple switch of flip chips at the front and rear dropouts. These eccentric chips, and corresponding dropout design allow the rider to easily change the bike geometry, effectively changing the chainstay length and fork length by 1 cm. The difference transforms the bike from a road machine with 415mm chainstay length, 368mm fork length, 73 degree headtube angle, and tire clearance for up to a 30mm, to a gravel bike with 425mm chainstay length, 378mm fork length, 72.5mm headtube angle, and 40mm tire clearance - all within a 10 minute switch of dropout chips. Pure road performance one day, gravel race-ready the next. One bike. No compromise. The ECHO Stem is a fully integrated system designed in tandem with our fork to completely conceal the cables while still using a standard headset, allowing the rider to easily swap stem lengths, and it works with a growing list of handlebars designed with integrated cables in mind. The system is the simplest and most user friendly on the market. The cables run through a channel on the top of the stem and are concealed by a faceplate, top cap, and the steerer tube. Headset adjustment is moved from the traditional position at the top of the stem to a threaded portion on the bottom of the stem that effectively increases the steerer clamp length to provide headset preload, much like a threaded headset. The Echo stem comes in 6 sizes from 80-130mm in 10mm increments and is a -6 degree. Like everything we do, the stem is MADE HERE in our Bentonville factory. A 100mm stem weighs 184g. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle THE SCIENCE OF ENGINEERING. THE ART OF RIDE QUALITY. The ALFA is a pure, balanced racing bike, equal parts aerodynamics, lightweight, and pedaling efficiency with classically inspired frame lines and the intuitive handling that only an ALLIED delivers. It’s not a “superbike.” It’s, simply, a superb bike — one that excels at every aspect of cycling, defies categorization, and disproves the logic of n+1. No weaknesses. No shortcomings. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle THE SCIENCE OF ENGINEERING. THE ART OF RIDE QUALITY. The ALFA is a pure, balanced racing bike, equal parts aerodynamics, lightweight, and pedaling efficiency with classically inspired frame lines and the intuitive handling that only an ALLIED delivers. It’s not a “superbike.” It’s, simply, a superb bike — one that excels at every aspect of cycling, defies categorization, and disproves the logic of n+1. No weaknesses. No shortcomings. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The Soloist. It's a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we're bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider, and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than the S5, but significantly more aerodynamic than the R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It's a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That's the Soloist. - Fast Like S5, Light Like R5 Soloist sits right between S5 and R5 on the performance scale, while having a price tag that’s less World Tour, more Road Trip. It’s about 250g heavier than R5, and 250g lighter than S5. It’s 190g slower than S5, but 126g faster than R5. You get the idea. It’s the ‘just-right’ answer for the rider trying to find a smart, intentional compromise. - Looks Like A Race Bike, Rides Like A Race Bike We took the handling geometry for the Soloist directly from R5. The R5 is beloved by pros and amateurs alike for its poise, stability, and precision when that killer climb turns into an even more killer descent. Soloist benefits from our decades of race bike geometry development, and comes out of the gate ready to go. - Hidden From The Wind, No Bleed Necessary The cable routing is inside the frame for aerodynamics but doesn't go through the stem. We developed our own system that threads the cables under the stem but through the bearing cap. Whether your position changes or you loan the bike to a friend who uses a different stem length, you won't need to bleed the brakes to swap the stem. - Clearance To Buzz The Tower The Soloist fits tires up to 34mm (measured), and wheels wide enough to support them. - BBRighT-47 The BBRighT-47 bottom bracket, which first appeared on the R5-CX, is ideal for those who log big miles but don't have a pro wrench checking the bike over every day. It makes BB swaps a breeze (convenient if you're burning through hand-me-down components) and extends the life of the frame.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with ‘road ride.’ Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun—the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun—the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle We engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It’s stiff—Classics-racing stiff—and performs like you’d want a road bike to perform off-road. We think that makes sense, and it’s what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle We engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It’s stiff—Classics-racing stiff—and performs like you’d want a road bike to perform off-road. We think that makes sense, and it’s what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with ‘road ride.’ Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun—the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The Soloist. It’s a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we’re bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than S5, but significantly more aerodynamic than R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It’s a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That’s the Soloist. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

The Soloist. It's a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we're bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than S5, but significantly more aerodynamic than R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It's a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That's the Soloist.

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The Soloist. It’s a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we’re bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than S5, but significantly more aerodynamic than R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It’s a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That’s the Soloist. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun - the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. - Removable FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. - Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

FOR YOUR BIG, STUPID RIDES On the fringes of cycling and triathlon, already endurance-oriented sports, there are athletes pushing their bodies and equipment to the limit. Ultra-distance, but ultra-fast. We call these Big, Stupid Rides, and since the introduction of the Caledonia in 2020, athletes around the world have been exploring just how big and just how stupid those rides can be. These athletes reach for the Caledonia-5. It’s built to handle long-distance, high-speed racing—with fit and handling geared toward comfort, but without sacrificing the Cervelo race bike feeling. For the new Caledonia-5, we focused on improvements that would be meaningful for the people pushing it to its limits. The biggest thing you’ll notice is the addition of the in-frame storage first seen on P-Series. This isn’t designed to fit a burrito—there’s only room for a small multi-tool, tube, and a CO2 canister. Then we looked to comfort: The seat stays are dropped, similar to Aspero, which makes that rear triangle more acute, and more vertically flexible. At the same time, there’s a bit more downtube stiffness to maintain that pro-level responsiveness Caledonia is known for. You can still stuff some big tires (36mm) in there, and every bike comes with fender mounts. Like all Cervélos, Caledonia-5 is UCI approved, and carries a lifetime warranty. We make race bikes, and we make them to last. IN-FRAME STORAGE New this year on the Caledonia-5, the in-frame storage is designed for a tube, small multi-tool, and a CO2 canister. Out of sight, out of mind, until your tire makes the bad noise.The hatch is easily removable even with gloves on—just flip the lock and pull. AERODYNAMICS All Cervélo bikes are aero bikes. And when you’re on three days of panini and candy, running on fumes into Checkpoint One, you’ll appreciate the free speed. The completely internal housing and aero tube shapes team up to help you do battle against the wind. REFINE AND ENHANCE Caledonia-5 is meant for all-day riding, high-pace group rides, and routes featuring less-than-ideal tarmac.We kept all the good stuff, but made some key improvements. The bearing caps are now split so you can swap between the high and low bearing cap without bleeding the brakes if you need to make a fit change. HAMMERHEAD-EQUIPPED The Red AXS build comes with the all-new Hammerhead Karoo. The Karoo is the perfect companion for big stupid rides, and allows you to pick your preferred route surface (road, gravel) as you explore the limits of a “good idea.” RESERVE 42|49 Developed and tested using Turbulent Aero technology, the 42|49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D’Italia, the 42|49 wheels have a lifetime warranty supported by a no-fault crash replacement.

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle Our engineers like to joke that, "if it looks fast, it probably is." But there’s some truth to that, and Áspero-5 looks fast standing still. No cables in the wind, tube shapes from our aerodynamically-proven library, and a hint of a cut out in the seat tube, all add up to a bike that proves the adage. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle Our engineers like to joke that, "if it looks fast, it probably is." But there’s some truth to that, and Áspero-5 looks fast standing still. No cables in the wind, tube shapes from our aerodynamically-proven library, and a hint of a cut out in the seat tube, all add up to a bike that proves the adage. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

A NEW BIKE FOR CLASSIC RIDES We don't see road bikes as delicate machines meant only for putting watts into and receiving speed from. They're an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it's seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. The Caledonia is the bike we keep reaching for when we know the odometer's going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We developed the Caledonia-5 in collaboration with our World Tour riders to satisfy the need for a dedicated cobbles bike. Faster handling isn't necessarily better-we engineered the handling based on the specific use-case. In this case, it's Roubaix. Roubaix is harder on bikes than any other race on the calendar, and there's zero margin for error. We increased the rear center, lowered the BB, and increased the trail. The handling is still fast, but we've added stability. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The S5 has one job—get to the line before everyone else. Under the likes of Wout van Aert, Marianne Vos, and Christophe LaPorte, the new model has already proven itself as a tool without equal. In the 2022 Tour de France, this bike propelled Wout to the highest ever Points Classification score of the modern era. At 480, Wout was some 194 points ahead of his nearest rival—tangible proof that Cervélo keeps delivering aerodynamic gains to our World Tour athletes. The new S5 has reduced drag by 65 grams, and increased the frame’s surface area while still reducing overall weight. The deeper frame sections maximize the shapes allowed by the UCI. Meanwhile the iconic V-stem has been further refined and a new fork designed to simplify the entire front end. What’s more, a ground-breaking new wheel design concept has been co-developed with Reserve to increase stability and reduce drag in turbulent aero conditions. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst

Custom build your bike exactly how you want it. Start by selecting your frame of choice, then select all the components exactly as you'd like. Once you've settled on your desired spec, we'll set up a bike fit to dial in your Bar/Stem dimensions and size. Bike fit and assembly of your bike are included in the price. Is there something you'd like that you don't see in the menus? We can likely accommodate. Not Included in Custom Builds: - Bar tape - Pedals - Saddle The S5 has one job—get to the line before everyone else. Under the likes of Wout van Aert, Marianne Vos, and Christophe LaPorte, the new model has already proven itself as a tool without equal. In the 2022 Tour de France, this bike propelled Wout to the highest ever Points Classification score of the modern era. At 480, Wout was some 194 points ahead of his nearest rival—tangible proof that Cervélo keeps delivering aerodynamic gains to our World Tour athletes. The new S5 has reduced drag by 65 grams, and increased the frame’s surface area while still reducing overall weight. The deeper frame sections maximize the shapes allowed by the UCI. Meanwhile the iconic V-stem has been further refined and a new fork designed to simplify the entire front end. What’s more, a ground-breaking new wheel design concept has been co-developed with Reserve to increase stability and reduce drag in turbulent aero conditions. For Shipping Enquiries Please contact Weborders@thebikeshop.com Adult bike Shipping cost - $100+Pst/Gst